Kinetic Technologies KTD2061 36-Channel RGB LED Driver
Kinetic Technologies KTD2061 36-Channel RGB LED Driver is a fully programmable current regulator for up to 12 RGB LED modules. The driver is ideally powered from a supply rail in the 3V to 5V nominal range. Three 4-wire buses are multiplexed to reduce the pin-count and PCB traces to the LEDs. The I2C control interface is used to set the LED color palette and then dynamically select the on/off status and color of each red-green-blue module. KTD2061 integrates a hardware fade engine per channel, which reduces the amount of software commands traditionally required to implement a lighting pattern. BrightExtend™ technology enables battery operation by decreasing dropout when the input voltage is too low for the forward voltage of the LEDs.
Features
Drives up to 36 LEDs (12 RGBs)Three multiplexed 4-wire bus to the LEDs reduces pin-count and PCB tracesIndependent up/down fading per LED (3-bit programmable fade rate)Automatically reduces current-sink dropout24mA output current2.5V to 5.5V operating supply voltage range
Applications
Artificial intelligence loudspeakersBLUETOOTH®/Wi-Fi® loudspeakers
Kinetic technologies Newest
Kinetic Technologies KTU1108 USB Type-C Protector for CC Pins is designed for ESD, surge, and over-voltage protection (OVP) on USB Type-C ports’ CC1 and CC2 (CC and VCONN) lines.
Date: 2019-09-17Kinetic Technologies KTD2061 36-Channel RGB LED Driver is a fully programmable current regulator for up to 12 RGB LED modules.
Date: 2019-08-08Kinetic KTS164xQ Automotive Load Switches offer low-resistance and enhanced protection features from an abnormal power supply or load problems.
Date: 2019-03-25Kinetic Technologies KTS1677A Load Switch provides enhanced system reliability and essential protection features.
Date: 2019-03-25Kinetic Technologies AS1113 & AS1114 13W PoE PD + DC-DC Controllers are single-chip, highly integrated CMOS solutions for Power over Ethernet (PoE).
Date: 2018-10-29Kinetic Technologies KTA1550 and KTA1552 Active EMI and ESD Suppressors are single-chip, highly integrated CMOS solutions for Common Mode (CM) noise suppression and transient voltage protection in Ethernet applications.
Date: 2018-03-01
选择你的位置